WINDOWS STARTUP REPAIR TO 10 HOW TO FIX IT IN ALL WINDOWS
WINDOWS STARTUP REPAIR TO 10 A black screen and a Windows 10 PC that won’t boot often means that your master boot record is on the fritz. In this tutorial, we’ll show you two way to fix windows startup repair and get your computer running again.
Why Won’t My Windows 10 PC Boot? (Meri Windows 10 Ki Window Kyu Load Ni Hogi)
The Windows 10 boot process is quite simple. When your computer startup, the BIOS or UEFI Firmware is loaded,
which performs a small set of checks on your hardware called the Power On Self Test (POST.) The BIOS then scans the hard disk master boot record,proper ready to work yes or no which loads an boot file on bios memory then we called WINLOAD.EXE. memory This kicks off the start-up process by loading the NT KRNEL.EXE (NT Kernel.exe is the heart of Windows) Windows 10 then performs tasks such as initializing your hardware like your mouse and keyboard and reading the Windows Registry and user profile
If you see a black screen with gray text that reads “Windows Boot Manager” with an error along the lines of “Status: 0xc0000605 Info: A component of the operating system has expired that means is something went wrong with WINLOAD.EXE Program
This is obviously not a good thing. But it’s not the end of the world either.
Performing a Startup Repair (Hum Startup Repair Karenge)
The first thing you can try is booting into the recovery environment, if possible, and then performing a startup repair. If you are access the recovery environment mode you are turn off your computer in one or three time on and off during this process you make sure you While booting, you turn off the computer when you see the Windows logo. Or check pc is proper shut down After the third time, Windows 10 will boot into diagnostics mode and Click Advanced options when the recovery option you see
Click Advanced options.
CLICK ON STARTUP REPAIR
Then Restart Your Pc Friend All Done Windows Start Normally